3RD Team NET DIY MEET Disscussion meet

[klepto]

If it isnt cold on December 6, 2003 (saturday) ya'll wanna go threw the DIY meet?  Also considering ya'll get what ya'll need by then.

HOLLA

JEFF

[corollamadness]

lol i posted this on another thread but anywayz im down just got to place my order today or tom.

[klepto]

CHANGE OF PLANS, 3RD DIY MEET WILL MORE THAN LIKELY TAKE PLACE ON 12/6/03 12 pm (NOON) -- SEE PAGE 4 FOR DETAILS

PEOPLE WHO ARE INTERESTED IN REGROUNDING THEIR ENGINES PLEASE LIST YOUR NAMES.

1. silvercorolla -- Pete
2. Martin11581 -- martin
3. mytoy_94 -- Rob
4. dragonrolla -- John
5. skillz -- Nick
6. aznt1217 -- --Yo take a moment 2 introduce yoself in/newbie forum
7.
8.
9.
10.

Is this list accurate???  Can Ya''l make it for Saturday, December 6, 2003?  Will Ya'll Have the Material Needed by Then???  If so then on we go to reground ya'll engines....

Location well that is the tricky part.  Anyone wanna use their place??

Location:  To be discussed
Date:  Saturday, December 6, 2003
Time:  12 PM -- NOON
Agenda:  Engine regounrd
Materials needed:  Please see Page 2 of this thread.

HOLLA QUICK W/ RESPONSES................

JEFF

[mytoy_94]

Can Ya''l make it for Saturday, December 6, 2003?

No, I have a Army vs. Navy football game in Philly that i'm going to..

Will Ya'll Have the Material Needed by Then?

Nope, i'm spending all my money xmas shopping, ya know how some of us Latino families have 3K cousins 2k Tias, etc..!!  But i would still like to go and help out though..

[klepto]

I honestly think that the best time is after the holiday season for sure.  The only reason I suggested moving up the date was because of of the members wanna have a DIY meet real bad (Xavier :wink: )

But its actually up to ya'll.  I suggest ya'll discuss and come to terms to figure it out.

HOLLA

JEFF

[corollamadness]

yo y not help rob out here a lil lets all chip in and hook him up and he can hook up us after the holidays, im always welcome to help a friend. so we can be all be able to do this at the same time

anybody with me?  thats y we are car club buddies to help one and other.

thats if we decide to do it on dec 6.

[klepto]

Im broke till the 30th.  Ill help chip in a bit.  

ROB--ATTENTION--ROB--CALLING ROB!!!!!!!!!!!!!!!!!!

hows this sound to you?  I know you are busy n stuff, but if u cool, then Im cool.

holla

JEFF

[mytoy_94]

Thanks Guys, but i'm cool.. BUt like i said i wont be able to make it on the 6th since i have to go to a football game..  And even if i'm able to attend, i can always help out/learn how to do it, so when i get mine after Xmas i should be able to do it by myself with no problems.. But thanks  for the offer :kiss:  lol

[klepto]

hey man no problem.  But I think for the most part, instead of rushing the meet, how about we just CAMLY plan a date, lol.

I think for the most part after Xmas & New Years is probably best.  Another factor to consider is weather; cold, wind, snow, sleet.  Then there is the day light issue, we would have to work rather quickly to finish w/ enough time to actually enjoy some of the day light, lol.  3rd, if we do it in the winter time, WE CAN HAVE A SNOW BALL FIGHT, snow permitting, lol.

holla

JEFF

[laz]

Dude, I am down for a good snowball fight!!

X

[mytoy_94]

Well if some other people have the parts and ready to install a specific mod, i say we do it sometime soon out of convenience for them.. Cause i know when i have something in the closet i can't wait to get it installed..

So if anyone is anxiouse to get something installed speak up..  If not i'm always down for snowball fight, lol..  I'll built me a little Snow Fortress :mrgreen:

[aznt1217]

sorry dude i cant makeit in december but most of the summer meets next year  i   can hey klepto do u live on 218thst. on northern?  i think saw ure car

[klepto]

nah 123rd off Lefferts South Side

holla

jeff

I was on northern though this past sunday at my wedding photogragher place by that Peir something Restaurant, then I hit up the IHOP going west towards Flushing.

holla

[leeden]

Sorry guys, I've got a project and final to study for. Don't worry though, I was only going to watch, I wasn't going to work on my car.

[klepto]

AIGHT FELLAS LISTEN UP AND SPREAD THE WORD...

THIS 3RD OFFICIAL TEAM NET DIY MEET WILL BE POSTPONED UNTIL THE ORIGINAL SET DATE UNTIL FURTHER NOTICE.

OFFICIAL DIY MEET INFO

DATE:  MARCH 2004 -- UNTIL FURTHER NOTICE
Location:  Under discussion
Time:  12 PM -- NOON
Agenda:  Engine reground, be prepared to get dirty because ya'll have to put in work
Materials needed:  Speak to Laz (Xavier) or read Page 2 of the following thread

HOLLA

JEFF

[klepto]

:repost:  :repost:  :repost:  :repost:  :repost:  :repost:  :repost:  :repost:
I know this is a REPOST, but just want to make sure ya'll are fully informed and not still thinking something will happen on the 6th of December.

GUYS I KNOW SOME OF YA'LL WANT TO REGROUND YA'LL ENGINES, SO HOW ABOUT WE DUSCUSS HAVING A MEET SPECIFICALLY SO THAT ALL THAT WANT THIS DONE CAN DO IT AND HELP EACHOTHER OUT AND LEARN SOMETHING NEW.

HOLLA

TELL ME WHAT YOU THINK YA'LL.  IT PROBABLY WOULDNT BE SCHEDUALED TILL ITS WARM AGAIN THOUGH.

HOLLA

JEFF

AIGHT FELLAS LISTEN UP AND SPREAD THE WORD...

THIS 3RD OFFICIAL TEAM NET DIY MEET WILL BE POSTPONED UNTIL THE ORIGINAL SET DATE UNTIL FURTHER NOTICE.

OFFICIAL DIY MEET INFO

DATE:  MARCH 2004 -- UNTIL FURTHER NOTICE
Location:  Under discussion
Time:  12 PM -- NOON
Agenda:  Engine reground, be prepared to get dirty because ya'll have to put in work
Materials needed:  Speak to Laz (Xavier) or read Page 2 of the following thread

HOLLA

JEFF

**********SEE PAGE 4 FOR DETAILS*********

PEOPLE WHO ARE INTERESTED IN REGROUNDING THEIR ENGINES PLEASE LIST YOUR NAMES.

1. silvercorolla -- Pete
2. Martin11581 -- martin
3. mytoy_94 -- Rob
4. dragonrolla -- John
5. skillz -- Nick
6. aznt1217 -- --Yo take a moment 2 introduce yoself in/newbie forum
7.
8.
9.
10. [/b]

 :repost:  :repost:  :repost:  :repost:  :repost:  :repost:  :repost:  :repost:
I know this is a REPOST, but just want to make sure ya'll are fully informed and not still thinking something will happen on the 6th of December.

[njtony]

i will try to make it to the next meet..diy, all toyota, pool, bowling or whatever...

i don't think i will reground my car tho...i think it's working just fine
since i don't have no other electronics stuff in my car beside what comes in stock...

is there anything else , like some  little affordable mod we can all do together?? let's think!

[King_Lionheart]

Hey depending on the time and date, I'll be there.  That is a long way off.  The only thing is that I already regrounded my whole engine bay on the 2001 rolla.  I'll be there for people who need help though and hopefully someone will help me reground the new car I just bought.  Its the 1989 Toyota MR2.  Hope someone thats going knows something about that car.

[klepto]

OK fellas, lets start first of w/ the questions...WHO NEEDS TO REGROUND THEIR ENGINES?

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

2nd of all, all the needed materials are mentioned in this thread, but is X still has the info handy, Please post here for them.

3rd order of business.  Date, time, location.  Suggestions?

4th Me and X are gonna HELP you threw the process, so BE PREPARED TO GET DIRTY  because you are going to have to do the install yourself w/ our guidance and help as well.  So dress for the occasion.  Please, I dont want to hear any "I Dont think I can Do it"...or any other remarks in that nature, YOU CAN AND YOU WILL.  Period, end of story.  We few who know a lil bit of a lil bit learned threw trial and error and from hands on learning and guidance, that is what we want to achieve w/ this DIY.  Also want to achieve learning to work together, helping your fellow Team mates out.  And at the end of the day we shouldve bonded more and walked away learning something new.

Holla

j :twisted:

[corollamadness]

any reason y u posted the same thing 3x's

i dont have no major wiring done to my ride but ill get it done just to have another mod for the ride...

[SyNfuLRoLLa]

OK fellas ***EDIT*** AND LADIES!!, lets start first of w/ the questions...WHO NEEDS TO REGROUND THEIR ENGINES?

1.  98RollaGyrl
2.
3.
4.
5.
6.
7.
8.
9.
10.


When are we gonna do this? Spring i hope!

[klepto]

any reason y u posted the same thing 3x's

i dont have no major wiring done to my ride but ill get it done just to have another mod for the ride...

Sorry I dint realize I did that, cause I kept editing it, lol

anyone else interested in thi svery simple inexpensive mod?

1. 98RollaGyrl
2. silvercorolla
3.
4.
5.

Holla

j :twisted:

[mytoy_94]

I'm down, but only when its warm again. Cause i aint gonna be working on my car in this cold.

[klepto]

I'm down, but only when its warm again. Cause i aint gonna be working on my car in this cold.

anyone else interested in thi svery simple inexpensive mod?

1. 98RollaGyrl
2. silvercorolla
3. mytoy_94
4.
5.

Holla

Martin? 03corollagrl? John? Nancy? Haether--if you want to drive down? NIck?

holla

j :twisted:

[klepto]

hey i think it was kind of my idea to have a DIY for this!!!! I am in...I have been waiting since Nov!!! Count me in. I already have my things thanks to Laz contact on ebay

anyone else interested in thi svery simple inexpensive mod?

1. 98RollaGyrl
2. silvercorolla
3. mytoy_94
4. martin
5.
6.
7.
8.

Holla

03corollagrl? John? Nancy? Heather--if you want to drive down? NIck? Chris?

holla  :!:

j  :twisted:

[klepto]

OK here a few dates to bounce off the wall to decide when we are thinking we would like to do this DIY.

March 6, 2003 -- Saturday
March 13, 2003 -- Saturday
March 20, 2003 -- Saturday
March 27, 2003 -- Saturday
April 3, 2003 -- Saturday

Schedualed time is as always 12 PM (noon aka lunch time)

Now all we need is a HOST.  So who is going to volunteer their garage/driveway?

holla

j :twisted:

BTW this thread is now closed and the UNOFFICAL 3rd DIY meet thread.  Please see the OFFICIAL DIY MEET THREAD FOR FURTHER INFO.

http://www.northeasterntuners.com/modules.php?name=Forums&file=viewtopic&p=9460#9460